MY-PV ELWA DC immersion heater (no inverter required)
12-0100 ELWA
Use solar PV power directly for water heating – no inverter required
ELWA is a 2 KW photovoltaic water heating device. Direct current (DC) from photovoltaic modules is transferred directly to the built-in heating element and immediately converted into heat, with minimal energy loss. The built-in MPP Tracker ensures that the PV generator is always operated at the optimum operating point (similar to a PV inverter).
For operation, no connection to the mains is required as the unit is powered by the PV generator (pure off-grid operation). The desired DHW temperature is set with a rotary knob, LED lights inform about the current device status.
If you have already met the ESB networks threshold for grid connected Solar PV (or have plans to install grid connected Solar PV), ELWA will allow you to install even more Solar PV panels – without needing additional ESB Networks approval.
For direct connection to a dedicated PV system using standard Solar PV modules. The DC current from the photovoltaic modules is controlled with a MPP-Tracker for a maximum power output of the immersion heater (up to 2KW). No connection to a grid supply or inverter is required.
Cylinder connection is 1½ inch, and the heating element/rod is 45cm
- 100 % PV self-consumption
- No inverter required
- No grid connection application/paperwork
- Easy installation
- AC backup heating included
- Low cost compared conventional Solar Thermal systems
- 2 ELWAs can allow stratification-heating in larger cylinders
- Easiest installation with “cables instead of pipes”, less valuable copper, no maintenance costs
- Even works in case of power failure
- No anti-freeze liquid necessary – Cables have almost no energy loss compared to pipes
- MC4 connectors for connecting PV panels
No grid operator approval required: You save yourself tedious administrative work, because ELWA does not feed electricity into the grid.