Herschel iQ R2 Receiver
Key Features:
- Wireless receiver unit
- Use with T2 thermostat
- 1 hour boost function
- 433MHz RF and 2.4GHz wifi
- 10 Amp load at 230 volts
Description
The Herschel iQ R2 Receiver is specifically designed to control Herschel Infrared heaters. The R2 operates with the T2 Thermostat.
The R2 is the switch that turns your heaters on and off and must be wired to the heaters and mains power. It also acts as the internet gateway for the T2 enabling you to control the system with the SmartLife App.
The R2 pairs wirelessly with the T2 thermostat and receives control commands from the T2 to either turn the heater(s) on or off. Additional R2s can be added to the same T2 Thermostat to allow you to add several heaters in a room to the same T2 control.
The R2 Receiver features a 1 hour Boost function and all other control functions are provided from the T2 or SmartLife app.
Note:
Herschel controls will only work with Herschel heaters. Attempted use with any other heater brand will invalidate the warranty.
The R2 must be used with a T2 to control your heating.
Technical Specifications
- Surface: ARC+PC UL94 fire retardant plastic
- Voltage: 120 - 240VAC 50/60Hz
- Power Supply: Mains. 10A Peak Load.
- Protection Class: IP20
- Installation: Wall or ceiling-mounted
- Setpoint Range: 5-35°C
- Radio Frequency: 433MHz
- Wifi Band: 2.4GHz
- Programming: Only via pairing with T2
Certifications
- EU/ UK Electrical Safety: EN60730-1&2-9
- AUS/ NZ Electrical Safety: RCM Compliant. Low risk appliance.
- Electromagnetic Certification: EN62479; EN50663
- Radio Emissions Certification: EN300220-1&2; EN300328; EN301489-1;3;17
- Restriction of Hazardous Substances (RoHS): IEC62321
- Ecodesign Compliance: ErP Regulation (EU) 2015/1188 and Supplement (EU) 2016/2282 (Lot 20) when using Herschel Controls
Warranty: 2 Years
Note: Attempted use with any other heater brand will invalidate the warranty.